Woodpecker O-Light MAX Dental Wireless 1 Second LED Curing Light Cure Metal Head

Woodpecker O-Light MAX Dental 1 Second Cure LED Curing Light Metal Head

Features:
FDA and CE0197 Certificated.
Cure 2mm resin in one second, go quicker than ever.
360 degree rotary head, extend the possibility.
Wide spectrum, High light intensity, Focused light.
Constant light intensity: The solidification effect is not affected by the consumption of remaining power.
Large Capacity battery: A full charge can be used for more than 400 times continuously under 10s working time mode.
Woodpecker rechargeable lithium battery had received CB certification. The batteries refuse explosion.

Two working modes:
HIGH Mode: screen shows P1, Press the time button to select of time which could be 1s and 3s. Its output light intensity is about 2300 mW/cm2-2500 mW/cm2.
NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5s,10s ,15s and 20s. Its output light intensity is about 1000 mW/cm2-1200 mW/cm2.

Specification:
Adapter input: AC 100~240V, 50Hz/60Hz
Adapter output: DC 5V1A
Battery: ICR 18490, 1400mAh
Wave length: 385nm~515nm (Wide Spectrum)
Light intensity: 1000mW/cm2-2500mW/cm2
Illumination range: Diameter 10mm
Net weight: 0.6lb (259g)
Dimension: 10.6"×1"×1.25" (268.8×26.1×31.8mm)

Packing List:
Main unit of the LED x1
Light hood x1
Adapter x1
Bathymeter x1
Pedestal charger x1
Disposable sleeve x1
Transparent cover x5
Instruction manual x1
Qualified certificate x1

Direction To Use
STEP 1: Switch on the LED Light Cure Unit with "Power Button".
STEP 2: Press the mode button to set the working mode, the corresponding indicator will on when a mode set.
Select the appropriate Time/Mode & start using the LED Light for curing.